Skip to content

Guide

How we size a kitchen exhaust job: CFM ÷ 7

The rule of thumb behind a kitchen exhaust quote, from fan airflow to duct area to a starting figure, with a worked example.

Updated 7 November 2026 · 2 min read

The rule

CFM ÷ 7 = duct area in square feet. We use this as our starting point, then verify on site.

CFM is the exhaust airflow in cubic feet per minute. It is on the fan nameplate or the air balancing report.

A worked example

  1. 01

    Airflow

    The fan moves 12,000 CFM.

  2. 02

    Duct area

    12,000 ÷ 7 = 1,714 square feet of duct.

  3. 03

    Starting figure

    1,714 × ₹9 = ₹15,426.

Why it is only a starting figure

Typical unit rate for commercial kitchen exhaust cleaning starts at ₹9/sqft. Final rate depends on access, grease load and operating hours.

  • Access to the duct runs
  • How much grease has built up
  • The hours the kitchen can stop for cleaning

Prices are plus GST, and add-ons are quoted separately. The survey turns the starting figure into a written quote.

Try your own numbers

It is on the fan nameplate or the air balancing report.

Don't know your CFM? Send us a photo of the fan nameplate.

CFM ÷ 7 = duct area in square feet. We use this as our starting point, then verify on site.

Enter your airflow to see the duct area and a starting estimate.

Typical unit rate for commercial kitchen exhaust cleaning starts at ₹9/sqft. Final rate depends on access, grease load and operating hours.

Plus GST. The vertical riser and fan unit, and UV or air-washer units, are add-ons quoted separately.

Book a free duct inspection.

Tell us the building and the ducts. We reply with a written scope and a quote.

Mon – Sat · 09:30 – 19:00 · Emergency & night-shift cleans on request